Project Files
The project file stores preparations before programming. Users could also restore and save work environment. The project file includes device type, buffer data, operation option settings, configuration bit settings and batch commands. Project files may be password protected to increase security and reliability when operated by untrained operators.
Project Group: Operate Multiple Project Files in Batch Mode
Multiple chips could be programmed simultaneously using the Project Group
feature on the SuperPro IS416 software. Project Group organizes batch running of multiple projects and is available on all SuperPro ISP models. Other ISP programmers require a demultiplexer for programming two chips using a single ISP programmer and this solution is not suitable for volume production because it takes longer to program chips, causes noise interference, and incurs additional hardware and labor cost.
Super Scale Project Group
Complicated PCBA or multiple combined PCBAs may need multiple programmers to work properly. The Super Scale Project Group is responsible for the workflow across multiple programmers.
Auto Function
The Auto function organizes different functions into a sequential group (erase, blank check, program, verify and protect). Functions are executed in sequential order similar to a batch command.
Production Statistics
A log file could be used to save operation information before exiting the program. Log files can also be used to facilitate quality tracking.
Factory Mode
This mode is designed for factory volume production. To prevent operation errors from destroying chips and wrong date written to the chip, SuperPro will operate in Auto function mode. The administrator can set a password to prevent unauthorized access to the system.
XPlayer
SuperPro IS416 supports JAM, SVF and Staple files from ACTEL, Xilinx and ALTERA. SuperPro IS416 also supports Direct C files from ACTEL. STP or JAM files can be generated using design tools such as ISE and Quartus II.
Auto Recognition of File Types
We support almost all kinds of known file formats including file formats with automatic recognition functions: Binary, Intel (linear & segmented) Hex, Motorola S, Tektronix (linear & segmented), JEDEC, POF, etc.
Auto Increment of Serial Numbers
Auto-generation of electronic serial numbers is available on Superpro IS416. This feature is implemented by setting Auto Increment in Operation Option. Auto Increment allows users to add unique serial number into the device. After each successful programming, the software automatically changes the value by the specified increment mode. Barcode Management is also available to fulfill all setup tasks by scanning barcode on the job sheet.
Copyright Protection
With SD encryption, project file encryption and access control, volume control and remote control.
