LEAPER-56 Universal Programmer

Universal Chip Tool

LEAPER-56 Universal Programmer

The LEAPER-56 Universal Programmer delivers fast and accurate chip programming for multiple device types. It is designed for professional use in industrial and electronics applications. The system ensures reliable performance with stable and efficient operation. Its user-friendly interface allows easy control and setup for technicians. Ideal for production environments, it enhances productivity and programming accuracy.

Universal programmer supports multiple chip devices
Fast programming ensures high productivity performance
Accurate operation reduces errors in programming tasks
User friendly interface simplifies control and setup
Stable performance ensures reliable industrial usage
Ideal for production and repair environments usage

Introduction Features Specification Video

Previous Next

Introduction

The LEAPER-56 Universal Programmer is a pocket size universal programmer. It provides with 75MHz bandwidth and < ±2.5nS signal skew just in smart-phone size. The programming speed is much faster than the other universal programmers on the market in any time and any condition.

By letting your PC or laptop connect with LEAPER-56 Universal Programmer, it will perform your outstanding ability of development and debugging. You can easily have professional factory-level productivity. Nor Flash, Microcontroller, MCU, CPLD, FPGA, PLD, SRAM are all covered.

Features

Portable mini size. Without socket, only 136mm(L)* 90mm(W)* 20mm(H). You just need to connect with USB cable to use. No additional power supply.
Provide with DUT 75MHz bandwidth and < ±2.5nS signal skew. In addition to the high processing speed, you can verify whether the ICs processing frequency meets the specifications.
Via USB HUB, you can connect multiple LEAPER-56s to do gang programming. It makes development and mass production proficient.
Provide with DUT device pin checking and memory components ID verification. Ensure the best yield rate of processing.

Specification

Device power signal
- Logic signal level: 1.5V~6.0V,10mV
- IOL, IOH current: 10mA
- Logic signal frequency: 75MHz (3-5V), 60MHz (2.5V), 45MHz (1.8V), 25MHz (1.5V)
- Signal skew: <±2.5nS (3-5V)
- Clock frequency: 0Hz ~ 75MHz
- VDD, VIO level: 1.5V~6.5V,10mV
- IDD, IIO frequency: 400mA
- VPP, VHH level: 1.5V~15.5V,20mV
- IPP, IHH frequency: 150mA
- Pin drivers: 48 Pin Universal Pin Driver (Zero Inser ion Force)
- DUT socket: DIP 48 ZIF
- Dimension: 136(L) x 90(W) x 20(H) mm, Socket is not included
- Weight: 282g

PC System Requirements

Operating System：Windows 10 / 8 / 7 / Vista / XP ( 32bits & 64bits )
Processor: Pentium 4 above
Memory: 2 GB RAM above
Hard disk: 500 MB above / buffer: 1GB above
Communication: USB 2.0 high speed only
USB powered: Connect the cable with 2 USB port (900mA above)

The software installation notice

The LEAPER-56 software includes:

1. PC Software

2. Database patch

Please install the software first, then the database patch.

Supported Devices

NOR FLASH, SPI, EPROM, EEPROM, MPU, MCU, CPLD, NV-RAM, etc.

Supported File Formats

Binary/Machine Code, Intel HEX,TEK HEX, Motorola HEX

Remarks

Must use the USB cable from the standard package, and connect to the USB ports behind your PC. Besides please also connect it with 2 USB ports, or through the USB Hub (5V/1A).
When you need adapters to process the high-speed components, be sure to use good quality adapters. In order to have the best high-frequency process performance, the socket and DUT must keep good contact.

Standard Accessories

Main unait x 1
Y-USB cable x1

Optional Accessories

PLCC, SDIP, SOP, VSOP, SSOP, TSOP, TSSOP, QFP, PQFP, TQFP, VQFP, BGA, uBGA, SON, WSON, QFN (MLF)….adapters.

LEAPER-56 Universal Programmer